Species: Tali


« Back to species

Tali
Species profile
The wood is orangey yellow brown to reddish brown. Tali from East Africa has a lighter colour. The sapwood is clearly demarcated. The grain is interlocked and the texture is coarse.

The blunting effect is fairly high; peeling is bad and slicing is not recommended or without interest. Requires power. Difficulties due to interlocked grain in planing. Nailing is good but pre-boring is necessary. Gluing is correct for interior only. With dampness, assembling of iron pieces is not advisable because of risks of reciprocal attack between wood and iron. It dries slowly and must be dried slowly and carefully in order to reduce defects.

Tali is very durable to fungi and is durable to dry wood borers; sapwood demarcated (risk limited to sapwood).

Tali can be used for several applications such as:
• interior: e.g. industrial or heavy flooring
• exterior: e.g. posts, stakes, bridges (parts not in contact with water or ground), sleepers, heavy carpentry, vehicle or container flooring

Can be used as a substitute for Azobe (Lophira alata).

References
• CIRAD Forestry Department

Family:ERYTHROXYLACEAE (angiosperm)
Origin:Africa
Local and common name(s)
Elone, Alui, Eloun, Mancone, Missanda, Sasswood, Tali, Mwavi, N' Kassa, Potrodom, Elondo, Erun, Kassa, Gogbei, Muave,
Scientific name(s)
Erythrophleum suaveolens, Erythrophleum ivorense,
Typical use
Sleepers, Hydraulic works (fresh water), Stakes, Industrial or heavy flooring, Bridges (Parts not in contact with water or ground),
Risk
Commercial restriction:No commercial restriction
Appearance
Grain:
Interlocked Grain:Marked
Sapwood:Clearly demarcated
Texture:Coarse
Typical colour:Brown
Physical description
Crushing strength:79 (+/- 11)
Specific Gravity (at 12% MC):0,91 (+/- 0,08)
Stability:Moderately stable to stable
Static bending strength:128 (+/- 19)
Strength class:
Durability
Dry wood borers:Class D - Durable
Fungi:Class 1 - Very durable
Termites:Class D - Durable
Treatability:Class 4 - Not permeable
References
Technical descriptions from the software Tropix 7 [1], with permission of the Research Unit Biomass, Wood, Energy, Bioproducts [2], CIRAD [3].

Links
Disclaimer:
This website is monitored and updated by FSC Denmark. The information displayed is based on the best accessible data and FSC Denmark strives to ensure that all information is correct. FSC Denmark cannot be held responsible for any consequences, such as product failure or other damage arising from the use of information from this website. If any errors or inaccuracies are detected, please contact the web editors through E-mail: